Single Phase Servo Voltage Stabilizer

Product Details:

SERVO VOLTAGE STABILIZER

Continuous stable supply of AC Power is the life line of any sophisticated and electrical&electronic system. The performance of these instruments is optimum at the rated voltage. Under voltage generally reduces efficiency, and very low voltage even can force the system to shut down. High voltage shortens the life and even can burn the instrument. Desta Servo voltage stabilizer receive fluctuating AC voltage of wide range and delivers constant Output voltage with in ± 1%of the nominal voltage; it is therefore an excellent remedy for the problems of wide fluctuations. The efficiency is maintained as high as 95%& more. The output voltage stability of our servo stabilizer allows the optimum drawing of the current by the connected load and as such no extra power is consumed at low as well at high voltage. This therefore save electric power to approximately 20% and reduces MDI.

      Suitable toroidal wound variac

      Geared servo motor unit with limit switches to avoid over running  at highest and lowest position.

      Microcontroller Digital display controlcard.

These entirecomponentsare interconnected to form Servo Voltage Stabilizer.

      Wave Shape distortion-nil.

      95% and more efficiency being achieved by optimum design and by use of high quality CRGO lamination and 99.9% pure copper.

      Immune to load PF and supply frequency variation.

      Power losses 2% maximum.

      Duty cycle continuous.

      Life expectancy 15-20 yrs.

      Operation-Auto/Manual.

      Control through Micro Processor Controller/IC based solid state plug in type glass epoxy control Card.

      High quality EHV grade oil as per IS-335.

      Reference Standard IS-9815, IS-2026.

Additional Information:

• Item Code: D1420
• Production Capacity: 100 Pcs. / Month
• Delivery Time: 3 to 4 Days

Product Details:

SERVO VOLTAGE STABILIZER

Continuous stable supply of AC Power is the life line of any sophisticated and electrical&electronic system. The performance of these instruments is optimum at the rated voltage. Under voltage generally reduces efficiency, and very low voltage even can force the system to shut down. High voltage shortens the life and even can burn the instrument. Desta Servo voltage stabilizer receive fluctuating AC voltage of wide range and delivers constant Output voltage with in ± 1%of the nominal voltage; it is therefore an excellent remedy for the problems of wide fluctuations. The efficiency is maintained as high as 95%& more. The output voltage stability of our servo stabilizer allows the optimum drawing of the current by the connected load and as such no extra power is consumed at low as well at high voltage. This therefore save electric power to approximately 20% and reduces MDI.

      Suitable toroidal wound variac

      Geared servo motor unit with limit switches to avoid over running  at highest and lowest position.

      Microcontroller Digital display controlcard.

These entirecomponentsare interconnected to form Servo Voltage Stabilizer.

      Wave Shape distortion-nil.

      95% and more efficiency being achieved by optimum design and by use of high quality CRGO lamination and 99.9% pure copper.

      Immune to load PF and supply frequency variation.

      Power losses 2% maximum.

      Duty cycle continuous.

      Life expectancy 15-20 yrs.

      Operation-Auto/Manual.

      Control through Micro Processor Controller/IC based solid state plug in type glass epoxy control Card.

      High quality EHV grade oil as per IS-335.

      Reference Standard IS-9815, IS-2026.

Additional Information:

• Item Code: D1415
• Production Capacity: 100 Pcs. / Month
• Delivery Time: 3 to 4 Days

Product Details:

SINGLE PHASE SERVO VOLTAGE STABILIZER

Continuous stable supply of AC Power is the life line of any sophisticated and electrical & electronic system. The performance of these instruments is optimum at the rated voltage. Under voltage generally reduces efficiency, and very low voltage even can force the system to shut down. High voltage shortens the life and even can burn the instrument. Desta Servo voltage stabilizer receive fluctuating AC voltage of wide range and delivers constant Output voltage with in ± 1%of the nominal voltage; it is therefore an excellent remedy for the problems of wide fluctuations. The efficiency is maintained as high as 95%& more. The output voltage stability of our servo stabilizer allows the optimum drawing of the current by the connected load and as such no extra power is consumed at low as well at high voltage. This therefore save electric power to approximately 20% and reduces MDI.

Basic components of Servo voltage stabilizer are:

Buck boost double wound transformer.

Suitable toroidal wound variac.

Geared servo motor unit with limit switches to avoid over running at highest and lowest position.

Microcontroller Digital display control card.

These entire components are interconnected to form Servo Voltage Stabilizer.

Salient Features

Wave Shape distortion-nil.

95% and more efficiency being achieved by optimum design and by use of high quality CRGO lamination and 99.9% pure copper.

Immune to load PF and supply frequency variation.

Power losses 2% maximum.

Duty cycle continuous.

Life expectancy 15-20 yrs.

Operation-Auto/Manual.

Control through Micro Processor Controller/IC based solid state plug in type glass epoxy control Card.

High quality EHV grade oil as per IS-335.

Reference Standard IS-9815, IS-2026.

Technical Specification of Servo Voltage Stabilizer
Make: Desta
Type: Indoor Floor Mounting.
Capacity: 1 KVA to 150 KVA
Input Voltage: As Per Customer Requirement.
Output Voltage: 230/240 Volts.  ± 1% Nominal. Front panel Adjustment with in ± 5% of Nominal Voltage.
Input/Output Connection: Terminals of suitable rating.
Correction Rate: 15-25 volts/ Sec.
Suitability: Unbalance Input Voltage, Balance Output Voltage & Balance/ Unbalance Load.

Compatibility: Use with Mains and DG set.
Environment: Designed for Indoor Tropical Use.
Ambient: -10 to 50 deg. C RH 95%
Insulation Resistance: <6 Mega Ohms at 500V DC.
Dielectric test: 1.5 KV RMS for 1 minute for the unit 2.5KV for the Power components.
Auto/ Manual operation: Provided.
Efficiency: >95%
Wave form Distortion: Nil
Visual Indications: Input, Output, Low/High Voltage, Time Delay, Mains ON, Low/High Voltage Cut-off.
Nature of Cooling: Air Cooled / Oil Cooled
Response Time: 10 m sec.
Control: Through Micro Controlled Digital Circuit.
Reference Standard: IS-9815, IS-2026.

Additional Information:

• Item Code: P1005
• Production Capacity: 100 Pcs. / Month
• Delivery Time: 5 to 10 Days

Product Details:

SERVO VOLTAGE STABILIZER

Continuous stable supply of AC Power is the life line of any sophisticated and electrical&electronic system. The performance of these instruments is optimum at the rated voltage. Under voltage generally reduces efficiency, and very low voltage even can force the system to shut down. High voltage shortens the life and even can burn the instrument. Desta Servo voltage stabilizer receive fluctuating AC voltage of wide range and delivers constant Output voltage with in ± 1%of the nominal voltage; it is therefore an excellent remedy for the problems of wide fluctuations. The efficiency is maintained as high as 95%& more. The output voltage stability of our servo stabilizer allows the optimum drawing of the current by the connected load and as such no extra power is consumed at low as well at high voltage. This therefore save electric power to approximately 20% and reduces MDI.

      Suitable toroidal wound variac

      Geared servo motor unit with limit switches to avoid over running  at highest and lowest position.

      Microcontroller Digital display controlcard.

These entirecomponentsare interconnected to form Servo Voltage Stabilizer.

      Wave Shape distortion-nil.

      95% and more efficiency being achieved by optimum design and by use of high quality CRGO lamination and 99.9% pure copper.

      Immune to load PF and supply frequency variation.

      Power losses 2% maximum.

      Duty cycle continuous.

      Life expectancy 15-20 yrs.

      Operation-Auto/Manual.

      Control through Micro Processor Controller/IC based solid state plug in type glass epoxy control Card.

      High quality EHV grade oil as per IS-335.

      Reference Standard IS-9815, IS-2026.

Additional Information:

• Item Code: D1410
• Production Capacity: 100 Pcs. / Month
• Delivery Time: 3 to 4 Days

Product Details:

SINGLE PHASE SERVO VOLTAGE STABILIZER

Continuous stable supply of AC Power is the life line of any sophisticated and electrical & electronic system. The performance of these instruments is optimum at the rated voltage. Under voltage generally reduces efficiency, and very low voltage even can force the system to shut down. High voltage shortens the life and even can burn the instrument. Desta Servo voltage stabilizer receive fluctuating AC voltage of wide range and delivers constant Output voltage with in ± 1%of the nominal voltage; it is therefore an excellent remedy for the problems of wide fluctuations. The efficiency is maintained as high as 95%& more. The output voltage stability of our servo stabilizer allows the optimum drawing of the current by the connected load and as such no extra power is consumed at low as well at high voltage. This therefore save electric power to approximately 20% and reduces MDI.

Suitable toroidal wound variac.

Geared servo motor unit with limit switches to avoid over running at highest and lowest position.

Microcontroller Digital display control card.

These entire components are interconnected to form Servo Voltage Stabilizer.

Wave Shape distortion-nil.

95% and more efficiency being achieved by optimum design and by use of high quality CRGO lamination and 99.9% pure copper.

Immune to load PF and supply frequency variation.

Power losses 2% maximum.

Duty cycle continuous.

Life expectancy 15-20 yrs.

Operation-Auto/Manual.

Control through Micro Processor Controller/IC based solid state plug in type glass epoxy control Card.

High quality EHV grade oil as per IS-335.

Reference Standard IS-9815, IS-2026.

Additional Information:

• Item Code: D14025
• Production Capacity: 60 Pcs./ Month
• Delivery Time: 3 to 5 Days