Product Details:
Minimum Order Quantity | 1 Piece |
Is It Portable | Non Portable |
Product Type | Digital, Indoor |
Speed Correction | 15 to 25 V per Second |
Control Type | Micro controller, Digital controller |
Is It ISO Certified | ISO Certified |
Phase | Three Phase |
Type | Automatic |
Automatic Grade | Automatic |
3 | Capacity | 550KVA |
4 | Phase | 3Phase |
5 | Input Voltage | 340V - 470Volts. Corresponding Single Phase (196V – 271Volts) |
6 | Output Voltage | 415V ± 1% Nominal. Front panel Adjustment within ± 5% of Nominal Voltage. (240volts. 1Phase) |
7 | Input / Output Connection | Terminals of suitable rating. |
8 | Correction Rate | 15-25 volts/ Sec. |
9 | Suitability | Unbalance Input Voltage, Balance Output Voltage, & Balance/ Unbalance Load. |
10 | Compatibility | Use with Mains and DG set. |
11 | Environment | Designed for Indoor Tropical Use. |
12 | Ambient | -10 to 50 deg. C RH 95% |
13 | Insulation Resistance | <6 Mega Ohms at 500V DC. |
14 | Dielectric test | 1.5 KV RMS for 1 minute for the unit 2.5KV for the Power components. |
15 | Auto/ Manual operation | Provided. |
16 | Efficiency | >95% |
17 | Wave form Distortion | Nil |
18 | Visual Indications | I/p low /High Voltage. |
19 | Nature of Cooling | Oil Cooled |
20 | Response Time | 10 m sec. |
21 | Control | Through Micro Controlled Digital Circuit. |
22 | Reference Standard | IS-9815, IS-2026 |
23 |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Input Voltage | 340-470Volts |
Output Voltage | 415+-1% |
Product Type | Indoor, Digital |
Condition | New |
Capacity | 750 KVA |
Frequency | 50Hz |
Efficiency | 95% |
Warranty | 1 Year |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Input Voltage | 340 - 470 Volts. |
Output Voltage | 415 Volts |
Type | Manual, Automatic |
Capacity | 250 KVA |
Condition | New |
Product Type | Indoor, Digital |
Efficiency | 95% |
Warranty | 1 year |
SERVO VOLTAGE STABILIZER
Continuous stable supply of AC Power is the life line of any sophisticated and electrical & electronic system. The performance of these instruments is optimum at the rated voltage. Under voltage generally reduces efficiency, and very low voltage even can force the system to shut down. High voltage shortens the life and even can burn the instrument. Desta Servo voltage stabilizer receive fluctuating AC voltage of wide range and delivers constant Output voltage with in ± 1%of the nominal voltage; it is therefore an excellent remedy for the problems of wide fluctuations. The efficiency is maintained as high as 95%& more. The output voltage stability of our servo stabilizer allows the optimum drawing of the current by the connected load and as such no extra power is consumed at low as well at high voltage. This therefore save electric power to approximately 20% and reduces MDI.
Basic components of Servo voltage stabilizer are: Buck boost double wound transformer.Suitable toroidal wound variac.
Geared servo motor unit with limit switches to avoid over running at highest and lowest position.
Microcontroller Digital display control card.
These entire components are interconnected to form Servo Voltage Stabilizer.
Salient FeaturesWave Shape distortion-nil.
95% and more efficiency being achieved by optimum design and by use of high quality CRGO lamination and 99.9% pure copper.
Immune to load PF and supply frequency variation.
Power losses 2% maximum.
Duty cycle continuous.
Life expectancy 15-20 yrs.
Operation-Auto/Manual.
Control through Micro Processor Controller/IC based solid state plug in type glass epoxy control Card.
High quality EHV grade oil as per IS-335.
Reference Standard IS-9815, IS-2026.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Power | 350 |
Input Voltage | 242 - 480 Volts. |
Output Voltage | 400 Volts. + - 1% |
Control Type | Micro controller, Digital controller |
Cooling Type | Oil cooled |
Capacity | 350 KVA |
Frequency | 50 Hz |
Efficiency | 96% |
SERVO VOLTAGE STABILIZER
Continuous stable supply of AC Power is the life line of any sophisticated and electrical & electronic system. The performance of these instruments is optimum at the rated voltage. Under voltage generally reduces efficiency, and very low voltage even can force the system to shut down. High voltage shortens the life and even can burn the instrument. Desta Servo voltage stabilizer receive fluctuating AC voltage of wide range and delivers constant Output voltage with in ± 1%of the nominal voltage; it is therefore an excellent remedy for the problems of wide fluctuations. The efficiency is maintained as high as 95%& more. The output voltage stability of our servo stabilizer allows the optimum drawing of the current by the connected load and as such no extra power is consumed at low as well at high voltage. This therefore save electric power to approximately 20% and reduces MDI.
Basic components of Servo voltage stabilizer are:
Buck boost double wound transformer.
Suitable toroidal wound variac.
Geared servo motor unit with limit switches to avoid over running at highest and lowest position.
Microcontroller Digital display control card.
These entire components are interconnected to form Servo Voltage Stabilizer.
Salient Features
Wave Shape distortion-nil.
95% and more efficiency being achieved by optimum design and by use of high quality CRGO lamination and 99.9% pure copper.
Immune to load PF and supply frequency variation.
Power losses 2% maximum.
Duty cycle continuous.
Life expectancy 15-20 yrs.
Operation-Auto/Manual.
Control through Micro Processor Controller/IC based solid state plug in type glass epoxy control Card.
High quality EHV grade oil as per IS-335.
Reference Standard IS-9815, IS-2026.
Technical Specification of Servo Voltage Stabilizer
Make: Desta
Type: Indoor Floor Mounting.
Capacity: 1 KVA to 150 KVA / 3 KVA to 3000 KVA
Input Voltage: As Per Customer Requirement.
Output Voltage: 230/240 /400 / 415 Volts. ± 1% Nominal. Front panel Adjustment with in ± 5% of Nominal Voltage.
Input/Output Connection: Terminals of suitable rating.
Correction Rate: 15-25 volts/ Sec.
Suitability: Unbalance Input Voltage, Balance Output Voltage, & Balance/ Unbalance Load.
Compatibility: Use with Mains and DG set.
Environment: Designed for Indoor Tropical Use.
Ambient: -10 to 50 deg. C RH 95%
Insulation Resistance: <6 Mega Ohms at 500V DC.
Dielectric test: 1.5 KV RMS for 1 minute for the unit 2.5KV for the Power components.
Auto/ Manual operation: Provided.
Efficiency: >95%
Wave form Distortion: Nil
Visual Indications: Input, Output, Low/High Voltage, Time Delay, Mains ON, Low/High Voltage Cut-off.
Nature of Cooling: Air Cooled / Oil Cooled
Response Time: 10 m sec.
Control: Through Micro Controlled Digital Circuit.
Reference Standard: IS-9815, IS-2026.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Input Voltage | 320 - 470 Volts |
Output Voltage | 415 |
Type | Manual,Automatic |
Product Type | Indoor, Digital |
Condition | New |
Capacity | 200 KVA |
Efficiency | 95% |
Frequency | 50 Hz |
SERVO VOLTAGE STABILIZER
Continuous stable supply of AC Power is the life line of any sophisticated and electrical & electronic system. The performance of these instruments is optimum at the rated voltage. Under voltage generally reduces efficiency, and very low voltage even can force the system to shut down. High voltage shortens the life and even can burn the instrument. Desta Servo voltage stabilizer receive fluctuating AC voltage of wide range and delivers constant Output voltage with in ± 1%of the nominal voltage; it is therefore an excellent remedy for the problems of wide fluctuations. The efficiency is maintained as high as 95%& more. The output voltage stability of our servo stabilizer allows the optimum drawing of the current by the connected load and as such no extra power is consumed at low as well at high voltage. This therefore save electric power to approximately 20% and reduces MDI.
Basic components of Servo voltage stabilizer are: Buck boost double wound transformer.Suitable toroidal wound variac.
Geared servo motor unit with limit switches to avoid over running at highest and lowest position.
Microcontroller Digital display control card.
These entire components are interconnected to form Servo Voltage Stabilizer.
Salient FeaturesWave Shape distortion-nil.
95% and more efficiency being achieved by optimum design and by use of high quality CRGO lamination and 99.9% pure copper.
Immune to load PF and supply frequency variation.
Power losses 2% maximum.
Duty cycle continuous.
Life expectancy 15-20 yrs.
Operation-Auto/Manual.
Control through Micro Processor Controller/IC based solid state plug in type glass epoxy control Card.
High quality EHV grade oil as per IS-335.
Reference Standard IS-9815, IS-2026.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Input Voltage | 300 - 470 Volts. |
Output Voltage | 230 +- 1% |
Product Type | Digital, Indoor |
Capacity | 400 KVA |
Frequency | 50 Hz |
Efficiency | 96% |
Warranty | 1 year |
Speed Correction | 20 to 30 Volts. / Second |
SERVO VOLTAGE STABILIZER
Continuous stable supply of AC Power is the life line of any sophisticated and electrical&electronic system. The performance of these instruments is optimum at the rated voltage. Under voltage generally reduces efficiency, and very low voltage even can force the system to shut down. High voltage shortens the life and even can burn the instrument. Desta Servo voltage stabilizer receive fluctuating AC voltage of wide range and delivers constant Output voltage with in ± 1%of the nominal voltage; it is therefore an excellent remedy for the problems of wide fluctuations. The efficiency is maintained as high as 95%& more. The output voltage stability of our servo stabilizer allows the optimum drawing of the current by the connected load and as such no extra power is consumed at low as well at high voltage. This therefore save electric power to approximately 20% and reduces MDI.
Basic components of Servo voltage stabilizer are: Buck boost double wound transformerSuitable toroidal wound variac
Geared servo motor unit with limit switches to avoid over running at highest and lowest position.
Microcontroller Digital display controlcard.
These entirecomponentsare interconnected to form Servo Voltage Stabilizer.
SALIENT FEATURES
Wave Shape distortion-nil.
95% and more efficiency being achieved by optimum design and by use of high quality CRGO lamination and 99.9% pure copper.
Immune to load PF and supply frequency variation.
Power losses 2% maximum.
Duty cycle continuous.
Life expectancy 15-20 yrs.
Operation-Auto/Manual.
Control through Micro Processor Controller/IC based solid state plug in type glass epoxy control Card.
High quality EHV grade oil as per IS-335.
Reference Standard IS-9815, IS-2026.
Product Details:
Minimum Order Quantity | 1 Unit |
Input Voltage | 242 V - 470 Volts. |
Type | Automatic, Manual |
Cooling Type | Oil cooled, Air Cooled |
Product Type | Indoor, Digital |
Condition | New |
Capacity | 100 |
Frequency | 50 Hz |
Efficiency | 96% |
SERVO VOLTAGE STABILIZER
Continuous stable supply of AC Power is the life line of any sophisticated and electrical&electronic system. The performance of these instruments is optimum at the rated voltage. Under voltage generally reduces efficiency, and very low voltage even can force the system to shut down. High voltage shortens the life and even can burn the instrument. Desta Servo voltage stabilizer receive fluctuating AC voltage of wide range and delivers constant Output voltage with in ± 1%of the nominal voltage; it is therefore an excellent remedy for the problems of wide fluctuations. The efficiency is maintained as high as 95%& more. The output voltage stability of our servo stabilizer allows the optimum drawing of the current by the connected load and as such no extra power is consumed at low as well at high voltage. This therefore save electric power to approximately 20% and reduces MDI.
Basic components of Servo voltage stabilizer are: Buck boost double wound transformerSuitable toroidal wound variac
Geared servo motor unit with limit switches to avoid over running at highest and lowest position.
Microcontroller Digital display controlcard.
These entirecomponentsare interconnected to form Servo Voltage Stabilizer.
SALIENT FEATURES
Wave Shape distortion-nil.
95% and more efficiency being achieved by optimum design and by use of high quality CRGO lamination and 99.9% pure copper.
Immune to load PF and supply frequency variation.
Power losses 2% maximum.
Duty cycle continuous.
Life expectancy 15-20 yrs.
Operation-Auto/Manual.
Control through Micro Processor Controller/IC based solid state plug in type glass epoxy control Card.
High quality EHV grade oil as per IS-335.
Reference Standard IS-9815, IS-2026.Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Input Voltage | 350 - 470 Volts. |
Output Voltage | 400 +- 1% |
Cooling Type | Oil cooled |
Type | Manual,Automatic |
Condition | New |
Frequency | 50 Hz |
Efficiency | 90 to 95 % |
Warranty | 1 year |
SERVO VOLTAGE STABILIZER
Continuous stable supply of AC Power is the life line of any sophisticated and electrical&electronic system. The performance of these instruments is optimum at the rated voltage. Under voltage generally reduces efficiency, and very low voltage even can force the system to shut down. High voltage shortens the life and even can burn the instrument. Desta Servo voltage stabilizer receive fluctuating AC voltage of wide range and delivers constant Output voltage with in ± 1%of the nominal voltage; it is therefore an excellent remedy for the problems of wide fluctuations. The efficiency is maintained as high as 95%& more. The output voltage stability of our servo stabilizer allows the optimum drawing of the current by the connected load and as such no extra power is consumed at low as well at high voltage. This therefore save electric power to approximately 20% and reduces MDI.
Basic components of Servo voltage stabilizer are: Buck boost double wound transformerSuitable toroidal wound variac
Geared servo motor unit with limit switches to avoid over running at highest and lowest position.
Microcontroller Digital display controlcard.
These entirecomponentsare interconnected to form Servo Voltage Stabilizer.
SALIENT FEATURES
Wave Shape distortion-nil.
95% and more efficiency being achieved by optimum design and by use of high quality CRGO lamination and 99.9% pure copper.
Immune to load PF and supply frequency variation.
Power losses 2% maximum.
Duty cycle continuous.
Life expectancy 15-20 yrs.
Operation-Auto/Manual.
Control through Micro Processor Controller/IC based solid state plug in type glass epoxy control Card.
High quality EHV grade oil as per IS-335.
Reference Standard IS-9815, IS-2026.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Input Voltage | 340 - 470 Volts |
Output Voltage | 415 Volts. +- 1% |
Product Type | Indoor, Digital |
Type | Manual,Automatic |
Condition | New |
Capacity | 25 KVA |
Frequency | 50 Hz |
Efficiency | 95% |
SERVO VOLTAGE STABILIZER
Continuous stable supply of AC Power is the life line of any sophisticated and electrical & electronic system. The performance of these instruments is optimum at the rated voltage. Under voltage generally reduces efficiency, and very low voltage even can force the system to shut down. High voltage shortens the life and even can burn the instrument. Desta Servo voltage stabilizer receive fluctuating AC voltage of wide range and delivers constant Output voltage with in ± 1%of the nominal voltage; it is therefore an excellent remedy for the problems of wide fluctuations. The efficiency is maintained as high as 95%& more. The output voltage stability of our servo stabilizer allows the optimum drawing of the current by the connected load and as such no extra power is consumed at low as well at high voltage. This therefore save electric power to approximately 20% and reduces MDI.
Basic components of Servo voltage stabilizer are: Buck boost double wound transformer.Suitable toroidal wound variac.
Geared servo motor unit with limit switches to avoid over running at highest and lowest position.
Microcontroller Digital display control card.
These entire components are interconnected to form Servo Voltage Stabilizer.
Salient FeaturesWave Shape distortion-nil.
95% and more efficiency being achieved by optimum design and by use of high quality CRGO lamination and 99.9% pure copper.
Immune to load PF and supply frequency variation.
Power losses 2% maximum.
Duty cycle continuous.
Life expectancy 15-20 yrs.
Operation-Auto/Manual.
Control through Micro Processor Controller/IC based solid state plug in type glass epoxy control Card.
High quality EHV grade oil as per IS-335.
Reference Standard IS-9815, IS-2026.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | DESTA |
Power | 15 KVA |
Type | Manual |
Input Voltage | 340 - 470 Volts. |
Output Voltage | 400 Volts.+ - 1% |
Control Type | Micro controller, Digital controller |
Cooling Type | Dry Type, Air Cooled |
Product Type | Indoor, Digital |
SERVO VOLTAGE STABILIZER
Continuous stable supply of AC Power is the life line of any sophisticated and electrical system. The performance of these instruments is optimum at the rated voltage. Under voltage generally reduces efficiency, and very low voltage even can force the system to shut down. High voltage shortens the life and even can burn the instrument. Desta Servo voltage stabilizer receive fluctuating AC voltage of wide range and delivers constant Output voltage with in ± 1%of the nominal voltage; it is therefore an excellent remedy for the problems of wide fluctuations. The efficiency is maintained as high as 98-99%. The output voltage stability of our servo stabilizer allows the optimum drawing of the current by the connected load and as such no extra power is consumed at low as well at high voltage. This therefore save electric power to approximately 20% and reduces MDI.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Input Voltage | 340 - 470 Volts |
Output Voltage | 415 |
Cooling Type | Air Cooled |
Type | Manual |
Product Type | Digital, Indoor |
Condition | New |
Capacity | 15 KVA |
Efficiency | 95% |
SERVO VOLTAGE STABILIZER
Continuous stable supply of AC Power is the life line of any sophisticated and electrical & electronic system. The performance of these instruments is optimum at the rated voltage. Under voltage generally reduces efficiency, and very low voltage even can force the system to shut down. High voltage shortens the life and even can burn the instrument. Desta Servo voltage stabilizer receive fluctuating AC voltage of wide range and delivers constant Output voltage with in ± 1%of the nominal voltage; it is therefore an excellent remedy for the problems of wide fluctuations. The efficiency is maintained as high as 95%& more. The output voltage stability of our servo stabilizer allows the optimum drawing of the current by the connected load and as such no extra power is consumed at low as well at high voltage. This therefore save electric power to approximately 20% and reduces MDI.
Basic components of Servo voltage stabilizer are: Buck boost double wound transformer.Suitable toroidal wound variac.
Geared servo motor unit with limit switches to avoid over running at highest and lowest position.
Microcontroller Digital display control card.
These entire components are interconnected to form Servo Voltage Stabilizer.
Salient FeaturesWave Shape distortion-nil.
95% and more efficiency being achieved by optimum design and by use of high quality CRGO lamination and 99.9% pure copper.
Immune to load PF and supply frequency variation.
Power losses 2% maximum.
Duty cycle continuous.
Life expectancy 15-20 yrs.
Operation-Auto/Manual.
Control through Micro Processor Controller/IC based solid state plug in type glass epoxy control Card.
High quality EHV grade oil as per IS-335.
Reference Standard IS-9815, IS-2026.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Warranty | 1 Year |
Model Number | DE 1405 |
Output Voltage | 230 Volts. + - 1 % |
Type | Automatic |
Brand | DESTA ELECTRICALS (INDIA) PRIVATE LIMITED |
Condition | New |
Phase | Single Phase |
Time Delay | 5 Seconds |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | DESTA |
Type | Manual, Automatic |
Phase | Single Phase |
Condition | New |
Input Voltage | 140 - 270 Volts. |
Output Voltage | 230 Volts. +- 1 % |
Automatic Grade | Automatic |
Capacity | 5 KVA |
SERVO VOLTAGE STABILIZER
Continuous stable supply of AC Power is the life line of any sophisticated and electrical system. The performance of these instruments is optimum at the rated voltage. Under voltage generally reduces efficiency, and very low voltage even can force the system to shut down. High voltage shortens the life and even can burn the instrument. Desta Servo voltage stabilizer receive fluctuating AC voltage of wide range and delivers constant Output voltage with in ± 1%of the nominal voltage; it is therefore an excellent remedy for the problems of wide fluctuations. The efficiency is maintained as high as 98-99%. The output voltage stability of our servo stabilizer allows the optimum drawing of the current by the connected load and as such no extra power is consumed at low as well at high voltage. This therefore save electric power to approximately 20% and reduces MDI.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Type | Automatic, Manual |
Output Voltage | 400 Volts. +- 1% |
Input Voltage | 300 - 470 Volts. |
Control Type | Micro controller, Digital controller |
Cooling Type | Oil cooled |
Product Type | Indoor, Digital |
Capacity | 750 KVA |
Frequency | 50Hz |
SERVO VOLTAGE STABILIZER
Continuous stable supply of AC Power is the life line of any sophisticated and electrical & electronic system. The performance of these instruments is optimum at the rated voltage. Under voltage generally reduces efficiency, and very low voltage even can force the system to shut down. High voltage shortens the life and even can burn the instrument. Desta Servo voltage stabilizer receive fluctuating AC voltage of wide range and delivers constant Output voltage with in ± 1%of the nominal voltage; it is therefore an excellent remedy for the problems of wide fluctuations. The efficiency is maintained as high as 95%& more. The output voltage stability of our servo stabilizer allows the optimum drawing of the current by the connected load and as such no extra power is consumed at low as well at high voltage. This therefore save electric power to approximately 20% and reduces MDI.
Basic components of Servo voltage stabilizer are:
Buck boost double wound transformer.
Suitable toroidal wound variac.
Geared servo motor unit with limit switches to avoid over running at highest and lowest position.
Microcontroller Digital display control card.
These entire components are interconnected to form Servo Voltage Stabilizer.
Salient Features
Wave Shape distortion-nil.
95% and more efficiency being achieved by optimum design and by use of high quality CRGO lamination and 99.9% pure copper.
Immune to load PF and supply frequency variation.
Power losses 2% maximum.
Duty cycle continuous.
Life expectancy 15-20 yrs.
Operation-Auto/Manual.
Control through Micro Processor Controller/IC based solid state plug in type glass epoxy control Card.
High quality EHV grade oil as per IS-335.
Reference Standard IS-9815, IS-2026.
Technical Specification of Servo Voltage Stabilizer
Make: Desta
Type: Indoor Floor Mounting.
Capacity: 1 KVA to 150 KVA
Input Voltage: As Per Customer Requirement.
Output Voltage: 230/240 Volts. ± 1% Nominal. Front panel Adjustment with in ± 5% of Nominal Voltage.
Input/Output Connection: Terminals of suitable rating.
Correction Rate: 15-25 volts/ Sec.
Suitability: Unbalance Input Voltage, Balance Output Voltage, & Balance/ Unbalance Load.
Compatibility: Use with Mains and DG set.
Environment: Designed for Indoor Tropical Use.
Ambient: -10 to 50 deg. C RH 95%
Insulation Resistance: <6 Mega Ohms at 500V DC.
Dielectric test: 1.5 KV RMS for 1 minute for the unit 2.5KV for the Power components.
Auto/ Manual operation: Provided.
Efficiency: >95%
Wave form Distortion: Nil
Visual Indications: Input, Output, Low/High Voltage, Time Delay, Mains ON, Low/High Voltage Cutoff.
Nature of Cooling: Air Cooled / Oil Cooled
Response Time: 10 m sec.
Control: Through Micro Controlled Digital Circuit.
Reference Standard: IS-9815, IS-2026.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Type | Automatic, Manual |
Output Voltage | 400 Volts. +- 1% |
Input Voltage | 280 - 480 Volts. |
Capacity | 50 KVA |
Efficiency | 95% |
Frequency | 50Hz |
Warranty | 1 Year |
Speed Correction | 15 to 25 Volts. / Sec. |
OIL COOLED SERVO VOLTAGE STABILIZER
Continuous stable supply of AC Power is the life line of any sophisticated and electrical & electronic system. The performance of these instruments is optimum at the rated voltage. Under voltage generally reduces efficiency, and very low voltage even can force the system to shut down. High voltage shortens the life and even can burn the instrument. Desta Servo voltage stabilizer receive fluctuating AC voltage of wide range and delivers constant Output voltage with in ± 1%of the nominal voltage; it is therefore an excellent remedy for the problems of wide fluctuations. The efficiency is maintained as high as 95%& more. The output voltage stability of our servo stabilizer allows the optimum drawing of the current by the connected load and as such no extra power is consumed at low as well at high voltage. This therefore save electric power to approximately 20% and reduces MDI.
Basic components of Servo voltage stabilizer are:
Buck boost double wound transformer.
Suitable toroidal wound variac.
Geared servo motor unit with limit switches to avoid over running at highest and lowest position.
Microcontroller Digital display control card.
These entire components are interconnected to form Servo Voltage Stabilizer.
Salient Features
Wave Shape distortion-nil.
95% and more efficiency being achieved by optimum design and by use of high quality CRGO lamination and 99.9% pure copper.
Immune to load PF and supply frequency variation.
Power losses 2% maximum.
Duty cycle continuous.
Life expectancy 15-20 yrs.
Operation-Auto/Manual.
Control through Micro Processor Controller/IC based solid state plug in type glass epoxy control Card.
High quality EHV grade oil as per IS-335.
Reference Standard IS-9815, IS-2026.
Technical Specification of Servo Voltage Stabilizer
Make: Desta
Type: Indoor Floor Mounting.
Capacity: 3 KVA to 3000 KVA
Input Voltage: As Per Customer Requirement.
Output Voltage: 400/415 Volts. ± 1% Nominal. Front panel Adjustment with in ± 5% of Nominal Voltage.
Input/Output Connection: Terminals of suitable rating.
Correction Rate: 15-25 volts/ Sec.
Suitability: Unbalance Input Voltage, Balance Output Voltage & Balance/ Unbalance Load.
Compatibility: Use with Mains and DG set.
Environment: Designed for Indoor Tropical Use.
Ambient: -10 to 50 deg. C RH 95%
Insulation Resistance: <6 Mega Ohms at 500V DC.
Dielectric test: 1.5 KV RMS for 1 minute for the unit 2.5KV for the Power components.
Auto/ Manual operation: Provided.
Efficiency: > 95%
Wave form Distortion: Nil
Visual Indications: Input, Output, Low/High Voltage, Time Delay, Mains ON, Low/High Voltage Cutoff.
Nature of Cooling: Air Cooled / Oil Cooled
Response Time: 10 m sec.
Control: Through Micro Controlled Digital Circuit.
Reference Standard: IS-9815, IS-2026.
Additional Information: